Skip to content

Learn

What Are the Co-op Alteration Agreement Plumbing Requirements?

By NYC Repipe & Repair · Last reviewed

Co-op alteration agreement plumbing requirements usually include plans reviewed by the building's engineer, a NYC Licensed Master Plumber with a DOB filing, certificates of insurance naming the co-op and managing agent, weekday working hours and scheduled riser shutoffs. Expect a refundable deposit of $5,000–$20,000 and a review fee of $1,000–$5,000.

NYC Repipe & Repair publishes these figures with named sources so every number can be checked before you call anyone, including us.

An apartment repipe in a co-op has two approvals, not one. The city wants a Licensed Master Plumber’s filing under the Plumbing Code; the board wants its own conditions met before anyone opens a wall. The alteration agreement is where the board’s conditions live, and the plumbing clauses are among the strictest because a mistake floods the neighbors below.

What co-op boards typically require for plumbing

Requirement What it usually means Source
Plans and engineer review Drawings reviewed by the building’s architect or engineer, paid by the shareholder Havard Cooper
Licensed, insured contractors A NYC Licensed Master Plumber for the plumbing Havard Cooper, above
Certificates of insurance From you, your contractor and major subs, naming the corporation and managing agent as additional insureds Havard Cooper, above
Security deposit $5,000–$20,000, refundable after sign-off Havard Cooper, above
Review or processing fee $1,000–$5,000, non-refundable Havard Cooper, above
Working hours Weekday business hours; evenings and weekends usually off-limits Havard Cooper, above
Riser shutoffs Scheduled through management, sometimes limited and charged per extra shutoff Reddit, r/NYCRenovations
Indemnity You cover damage your project causes to the building or other units Havard Cooper, above

Ask the managing agent for the building’s actual insurance limits, house rules and shutoff policy before you collect quotes. Every plumber pricing the job needs the same document.

Riser shutoffs and the per-shutoff fee

Shutting a riser cuts water to every apartment on that line, so buildings ration it. One shareholder planning a gut renovation reported that the co-op “allow[s] one shut off per water riser, after which they charge one thousand” per additional shutoff (Reddit, r/NYCRenovations). It’s one building’s policy, not a standard, but fees like it are common enough that the shutoff plan belongs in the quote.

The way to keep the count down is to install new full-port valves at each riser connection on the first shutoff. After that, all of the apartment repiping happens downstream of your own valves with the building in service. Water is normally restored at the end of each working day, and an apartment repipe typically takes a few days.

Plumbing rules beyond the paperwork

  • Copper only. The building engineer will expect Type L copper with soldered, brazed or permanent press joints. PEX isn’t listed on Table 605.4 of the NYC Plumbing Code, and removable push-fit fittings are banned (PC 605.9); see copper vs PEX in NYC.
  • No wet over dry. Most co-ops bar new bathrooms, kitchens or laundry over a neighbor’s bedroom or living room.
  • Engineer sign-off for moves. Moving waste lines or adding wet locations usually needs the building engineer’s approval, and may be barred by the riser layout.
  • Washers and dryers. Often restricted because of water risk and drain load.
  • Fixture upgrades. Some boards now require shareholders to replace branch lines when adding fixtures, or to swap flushometer toilets for tank toilets (Habitat).
  • Risers. Some agreements also make renovating shareholders replace the riser sections in their walls; read who pays for riser replacement in a co-op and riser replacement cost before signing.

Damage, insurance and who pays

The indemnity clause matters most when something goes wrong. Alteration agreements typically make you responsible for damage your project causes to the building or other units, including damage done by your contractor (Havard Cooper). In an old building, the hard cases are the ones where a decades-old riser fails near new work and the question becomes whether the work or the pipe’s age caused it. That’s why the board wants your plumber’s certificate before work starts, why you should read it too, and why photographs of the existing riser before the walls close are worth taking. For what a homeowner’s policy pays, see is repiping covered by insurance; for a leak that’s already happening, call for pipe repair or water leak detection first.

Timeline and DOB filing

Havard Cooper puts managing-agent review at about 1–2 weeks and board review at four to eight weeks once the package is complete. The plumber files the DOB work in parallel; a co-op apartment repipe pays the “other buildings” fee of $195 up to $3,000 of work plus $10.30 per $1,000 (DOB fee chart). The repiping permit guide explains the filing, and apartment repipe cost in NYC puts the plumbing price next to the board’s fees. The free pre-hire checklist includes an alteration agreement section. Most of these agreements are in Manhattan, where 70% of elevator co-ops and 98% of walk-up co-ops date from before 1940, including much of the Upper East Side.

Bottom line

Read the alteration agreement before you request quotes, and make every plumber price the same engineer review, insurance limits, working hours and shutoff plan. A Licensed Master Plumber’s DOB filing and the board’s approval are both required. Call (929) 659-6658 for a free on-site estimate with a written, itemized price.

Also asked

Quick answers

Does board approval replace a DOB permit?

No. They're separate approvals, and you need both. The board's approval covers the building's rules and its engineer's review of your plans. The DOB filing, made by a Licensed Master Plumber in DOB NOW: Build, covers the Plumbing Code. They usually run in parallel, and a permit doesn't satisfy the board any more than board approval satisfies DOB.

How many riser shutoffs will my plumbing job need?

Usually one per riser at the start, to cut in new valves or branches, and sometimes a second to finish. Many co-ops include a set number and charge for extras; one Manhattan shareholder reported a $1,000 charge per additional shutoff. A plumber who installs new riser valves on the first shutoff can often avoid the second.

Can I move my bathroom or kitchen in a co-op?

Sometimes, with limits. Most co-ops prohibit putting wet rooms over a neighbor's bedroom or living room, and moving waste lines or adding wet locations usually needs the building engineer's sign-off. The riser layout often decides what's possible. Relocations also usually take the job beyond a simple repipe filing into PE or RA drawings.

From range to real number

Get a written, itemized price for your job.

Pressure readings, the pipe material identified and a fixed scope, including the DOB permit and the wall openings.

Free estimate

The job · step 1 of 2
☎ (929) 659-6658 Free estimate